Chimney Systems

3PVP-TAD 3 PelletVent Pro Adapter Tee with Clean-Out Tee Cap Use for a 90° offset. Attaches directly to appliance as an adapter. Removable twist-lock Clean-Out Tee Cap. PelletVent Pro is a venting system designed for stoves and inserts that use wood...

3PVP-SC  3" Storm Collar This PelletVent Pro storm collar has an inner diameter of 3 inches and a double wall construction. cUL Listed. Double Wall. Biofuel/Oil/Pellet. Weather-Tight Seal. Finish: Stainless Steel. Fuel Type: BioFuel, Oil, Pellet...

PelletVent Pro Collection Flex Trim Collar - 3 Inch Inside Diameter Warranty Notice: M&G DuraVent warranty applies to this professional grade product only when installed by a trained professional installer. This Flex Trim Collar - 3 Inch Inside...

PelletVent Pro Collection DSA Roof Flashing - 7/12 - 12/12 Pitch - 3 Inch Inside Diameter Warranty Notice: M&G DuraVent warranty applies to this professional grade product only when installed by a trained professional installer. This DSA Roof...

This is a 3" Pellet Chimney Stainless Steel Clean-Out Tee Cap, this is from the PelletVent Pro Line. It has the duralock tightening system, to get a tight fit. Use this clean-out tee cap as a replacement with the Tee.

PelletVent Pro Collection 3 Inch Pellet Chimney Stainless Steel Appliance Adapter with Adjustable Clamp Warranty Notice: M&G DuraVent warranty applies to this professional grade product only when installed by a trained professional installer. This 3...

DuraVent DuraBlack 6" Snap Lock Adapter w/Trim 6DBK-ADSL 24 Gauge Spot-welded lock seams 18" clearance to combustibles Limited Lifetime Warranty    

Product Description 4PVP-T DuraVent Pellet Vent Pro Tee With Tee Clean Out Cap 4" Diameter All PelletVent Pro® components that come into contact with flue gases are built with an inner wall of corrosion resistant superferritic metal. PelletVent...

Product Description 3PVP-T DuraVent Pellet Vent Pro Tee With Tee Clean Out Cap 3" Diameter All PelletVent Pro® components that come into contact with flue gases are built with an inner wall of corrosion resistant superferritic metal. PelletVent...

8" Dura-Vent Dura/plus Chimney Cap, Stainless. Required where chimney pipe terminates above the roofline. Removable screws allow for cleaning of the chimney and spark arrestor screen. Materials and Construction.016" 430 stainless steel outer wall...

Supports chimney when it extends more than 4' over the roof. Legs adjust from 64" to 115". Use when securing DuraPlus pipe to the roof when it extends more than 5' above the roof line.    Materials and Construction.016" 430 stainless steel...

DuraPlus Flashing, 0/12 - 6/12 pitch Dead Soft Aluminum, Storm collar not Included.  Roof Flashing is used to weather proof the penetration of chimney pipe through the roof. A storm collar is required (not included). The DSA Flashing is designed...