Chimney Systems

8" Dura-Vent Dura/plus Flashing 7/12-12/12, Galvalume, Storm Collar Not Included. Roof flashings provide leak proof roof penetration. These flashings require a Storm Collar , sold separately.      Materials and Construction.016" 430...

8" Dura-Vent Dura/plus Flashing 0/12-6/12, Galvalume, Storm Collar Not Included. Roof flashings provide leak proof roof penetration. These flashings require a Storm Collar , sold separately.  Materials and Construction.016" 430 stainless steel...

For use in a ceiling or floor when a ceiling support is not used, allowing the passage of Class A chimney DuraPlus through floors and ceilings safely. 16" length, Galvanized, Storm collr included. Materials and Construction.016" 430 stainless...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.  The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2" clearance...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.   The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2"...

Use to adapt on a zero-clearance fireplace when using DuraPlus directly off the unit. Starter Section built in. Materials and Construction.016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate...

Use to support the Tee; suspended from a wall. Supports up to 35 ft. of DuraPlus Chimney. Starter Section built-in. Materials and Construction.016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate...

8" DuraPlus Galvanized Wall Thimble is used to pass through an outside wall. It must be installed with a length of chimney passing through it. This length connects to the tee on the outside of the building. Then one of three adaptors are used to connect...

8" DuraPlus Galvanized Wall Thimble is used to pass through an outside wall. It must be installed with a length of chimney passing through it. This length connects to the tee on the outside of the building. Then one of three adaptors are used to connect...

The DuraPlus Square Ceiling Support Box is used with flat, vaulted, or cathedral ceilings. Square Ceiling Support Box is painted black. Refer to Ceiling Pitch table to determine size of support box needed. Supports up to 35’ of DuraPlus...

The DuraPlus Square Ceiling Support Box is used with flat, vaulted, or cathedral ceilings. Square Ceiling Support Box is painted black. Refer to Ceiling Pitch table to determine size of support box needed. Supports up to 35’ of DuraPlus...

  The Round Ceiling support provides support for DuraPlus chimney system that must pass through a flat ceiling. It can support up to 35 feet of chimney and includes the trim collar that creates a smooth transition between the pipe and the ceiling...