Chimney Systems

The attic insulation shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the vent. Provides 1" clearance to combustibles.   Stunning design and Engineered Excellence®...

A ceiling fire stop is required for multi-story vertical installations at the second floor and any subsequent floors.   Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro features tight inner...

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (i.e.: ship lap siding, shake...

  The DirectVent Pro Wall Firestop is designed for horizontal (through-wall) installations. Refer to the appliance manufacturer's installation instructions for requirements.   Stunning design and Engineered Excellence® utilizing...

  The DirectVent Pro Wall Thimble provides a complete wall-pass-through and firestop and is designed for Square Horizontal Caps only.    Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing...

When a direct vent pipe must pass through a ceiling, it requires a ceiling support box that serves as the bottom support for the entire installation. This support box has an adjustable feature that allows it to be used with either cathedral or flat...

Provides pipe support for flat ceiling direct vent installations. Decorative cover for Wall Thimble. Black finish. Insulated to prevent air leakage. Approved for use with most direct vent appliances. Compatible with DirectVent Pro venting products...

  The DirectVent Pro 90° Elbow features a fully unitized twist-lock construction. All elbows include a swivel, allowing the lock to remain fully engaged, while aligning the elbow in the desired direction. The angle will remain fixed at...

  The DirectVent Pro 45° Elbow features a fully unitized twist-lock construction. All elbows include a swivel, allowing the lock to remain fully engaged, while aligning the elbow in the desired direction. Use elbows to offset...

   add length to a straight length of DirectVent Pro. 16" pipe adds 3" - 14 1/2" of length, when used with rigid sections of pipe. Designed for appliances tested and listed for direct vent and features a fully unitized twist-lock...

3" to 7" Adustable section that slips over another length of pipe.   Engineered Excellence® with innovation and style...DirectVent Pro. DuraVent's direct vent is specified exclusively by nearly every major stove and fireplace manufacturer in...

  Designed for appliances tested and listed for direct vent and features a fully unitized twist-lock construction. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1/2" for each...