Chimney Systems

  Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

Dead Soft Aluminum Flashing Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance...

  Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

An Extended Roof Bracket is used to support the chimney when it extends more than 5' above the roof. It provides stability to the chimney against wind and snow. Mounting brackets and adjustable tubing is included. Applications5"-8" DuraTech is a...

5" & 6" DuraTech Aluminum Storm Collar 5DT-SC Applications5"-8" DuraTech is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas,...

An Attic Insulation Shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. The Attic Insulation Shield fits over the Firestop Radiation Shield or a support box and consists of...

The Firestop Radiation Shield is installed where a chimney passes through a floor or ceiling without the use of a support box. It is used to center the pipe and assure the proper clearance required for the installation. The Firestop Radiation Shield...

The DuraTech Anchor Plate is used to attach DuraTech Chimney to zero-clearance or masonry fireplaces. Check with the zero-clearance fireplace manufacturer to ensure that DuraTech Chimney is an approved installation method. Applications5"-8" DuraTech is...

New integrated collar with adapter, fits into the female end of the chimney pipe to provide a decorative black finish. Use on chimney pipe that is suspended with the roof support system or on pipe that is passing through a wall thimble. Provides...

The DuraTech Tee with Cap is used start chimneys outdoors or indoors when it is installed inside a chase. The removable tee cap makes for easy cleaning and inspection of the chimney. The Tee with Cap must be installed with an adjustable tee support...

The Adjustable Tee Support Bracket is used as wall support for the tee and chimney. It features an adjustable base to provide 2" to 6" clearance to the wall and attaches to chimney pipe above or below the tee. The triangular bracket on the Tee Support...

The DuraTech Wall Thimble adjusts from a minimum of 4" to a maximum of 10", and fits between standard wall studs. To accommodate thicker walls, the telescoping pieces can be separated, and a field-fabricated extension installed. The interior trim ring is...