DuraVent DirectVent Pro Dsa Adjustable Flashing - 58DVA-F6DS

The DirectVent Pro 5" x 8" Galvanized DSA Flashing for Roof Pitch of 0/12 - 6/12 is a component that is used in a typical venting installation. The DuraVent dead soft aluminum flashing can be used with metal or tile roofs with a pitch of 0/12 - 6/12. It is made of malleable dead soft aluminum.

Engineered Excellence® with innovation and style...DirectVent Pro. DuraVent's direct vent is specified exclusively by nearly every major stove and fireplace manufacturer in the U.S. and Canada, with the largest choice of termination caps for direct vent available.

Applications
DirectVent Pro is a unitized, coaxial (concentric) venting system designed for use with direct vent gas or propane stoves, heaters, and fireplaces.

Materials and Construction
.020" aluminum inner wall. .018" galvanized steel outer wall. Painted outer walls made of laserwelded .018" galvalume steel. Caps also available in stainless steel and copper. Outer pipe brings combustion air to the appliance. Inner pipe exhausts flue gases to the outside. Gaskets or sealants not required (unless specified by the appliance manufacturer).

Clearances
Specified by the appliance manufacturer.

Listings
DirectVent Pro, in combination with the gas appliance, has been tested and listed as a decorative gas appliance system or as a direct vent heater system by a major testing agency, such as UL, CSA, Warnock Hersey, or OMNI. Check with your appliance manufacturer for approval.