DuraVent DuraPlus 8"

8DP-FCS 8" Dura-Vent DuraPlus Flat Ceiling Support Box  is designed to stay cool on the outside, to provide a hot draft on the inside, to boost stove efficiency, and to provide for a fire-safe design that protects both the chimney and the...

8DP-ES 8" Dura-Vent DuraPlus Elbow Strap, Galvanized Steel Materials and Construction.016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate liner. .16" 430 stainless steel inner liner. insulated...

8" Dura-Vent Dura/plus Chimney Cap, Stainless. Required where chimney pipe terminates above the roofline. Removable screws allow for cleaning of the chimney and spark arrestor screen. Materials and Construction.016" 430 stainless steel outer wall...

Supports chimney when it extends more than 4' over the roof. Legs adjust from 64" to 115". Use when securing DuraPlus pipe to the roof when it extends more than 5' above the roof line.    Materials and Construction.016" 430 stainless steel...

DuraPlus Flashing, 0/12 - 6/12 pitch Dead Soft Aluminum, Storm collar not Included.  Roof Flashing is used to weather proof the penetration of chimney pipe through the roof. A storm collar is required (not included). The DSA Flashing is designed...

8" Dura-Vent Dura/plus Flashing 7/12-12/12, Galvalume, Storm Collar Not Included. Roof flashings provide leak proof roof penetration. These flashings require a Storm Collar , sold separately.      Materials and Construction.016" 430...

8" Dura-Vent Dura/plus Flashing 0/12-6/12, Galvalume, Storm Collar Not Included. Roof flashings provide leak proof roof penetration. These flashings require a Storm Collar , sold separately.  Materials and Construction.016" 430 stainless steel...

For use in a ceiling or floor when a ceiling support is not used, allowing the passage of Class A chimney DuraPlus through floors and ceilings safely. 16" length, Galvanized, Storm collr included. Materials and Construction.016" 430 stainless...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.  The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2" clearance...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.   The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2"...

Use to adapt on a zero-clearance fireplace when using DuraPlus directly off the unit. Starter Section built in. Materials and Construction.016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate...

Use to support the Tee; suspended from a wall. Supports up to 35 ft. of DuraPlus Chimney. Starter Section built-in. Materials and Construction.016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate...