DuraVent DuraPlus 8"

8DP-FCS 8" Dura-Vent DuraPlus Flat Ceiling Support Box  is designed to stay cool on the outside, to provide a hot draft on the inside, to boost stove efficiency, and to provide for a fire-safe design that protects both the chimney and the...

8DP-ES 8" Dura-Vent DuraPlus Elbow Strap, Galvanized Steel Materials and Construction.016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate liner. .16" 430 stainless steel inner liner. insulated...

8" Dura-Vent Dura/plus Flashing 0/12-6/12, Galvalume, Storm Collar Not Included. Roof flashings provide leak proof roof penetration. These flashings require a Storm Collar , sold separately.  Materials and Construction.016" 430 stainless steel...

For use in a ceiling or floor when a ceiling support is not used, allowing the passage of Class A chimney DuraPlus through floors and ceilings safely. 16" length, Galvanized, Storm collr included. Materials and Construction.016" 430 stainless...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.  The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2" clearance...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.   The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2"...

Use to adapt on a zero-clearance fireplace when using DuraPlus directly off the unit. Starter Section built in. Materials and Construction.016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate...

8" DuraPlus Galvanized Wall Thimble is used to pass through an outside wall. It must be installed with a length of chimney passing through it. This length connects to the tee on the outside of the building. Then one of three adaptors are used to connect...

8" DuraPlus Galvanized Wall Thimble is used to pass through an outside wall. It must be installed with a length of chimney passing through it. This length connects to the tee on the outside of the building. Then one of three adaptors are used to connect...

8DP-09 8" x 9" Dura-Vent DuraPlus Chimney Length, Inner Liner 430-alloy Stainless, Galvanized Outer Wall DuraPlus Chimney is a triple-wall, all-fuel chimney for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other...

6" & 8" Dura-Vent DuraPlus Storm Collar, Galvalume.  Use this aluminum storm collar on any through-the-roof installations using a roof flashing. ApplicationsDuraPlus Chimney is a triple-wall, all-fuel chimney for use with wood stoves,...

Use to divert snow around chimney, vent, and roof flashing. Constructed of paintable galvanized material. Ships flat for easy assembly. Can be used with DuraTech, DuraPlus, DuraPlus HTC, DuraChimney II, PellentVent Pro, DuraLiner, DuraFlex SS, and...