DuraVent DuraTech 7"

  DuraTech Class-A Chimney System 15° Elbow Kit - Use elbows to offset around obstructions such as rafters, ridgepoles or joists. Offsets greater than 30° are not allowed. Each elbow swivels a full 360°. The DuraTech Class-A Chimney...

DuraTech Class-A Chimney System 30° Elbow Kit - Use elbows to offset around obstructions such as rafters, ridgepoles or joists. Offsets greater than 30° are not allowed. Each elbow swivels a full 360°. The DuraTech Class-A Chimney System...

The DuraTech Trim Collar conceals the gap between the Round Ceiling Support Box and the ceiling cutout. Use this trim collar for a 7" - 8" round ceiling support box Applications 5"-8" DuraTech is a double-wall, all-fuel chimney system for use with wood...

Used to add support to pipe lengths elbows and tees. This part is optional. Applications5"-8" DuraTech is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled...

Required when terminating a chimney above the roof. Spark arrestor screen available but not included. Applications5"-8" DuraTech is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or...

Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

  Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

  Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

 The DuraTech Storm Collar is an aluminum constructed chimney component that slips around the pipe just above the flashing used in through-the-roof installations. The inner edge of the Storm Collar is sealed to the chimney pipe with a non-hardening...

The Firestop Radiation Shield is installed where a chimney passes through a floor or ceiling without the use of a support box. It is used to center the pipe and assure the proper clearance required for the installation. The Firestop Radiation Shield...

An Attic Insulation Shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. The Attic Insulation Shield fits over the Firestop Radiation Shield or a support box and consists of...

The DuraTech Anchor Plate is used to attach DuraTech Chimney to zero-clearance or masonry fireplaces. Check with the zero-clearance fireplace manufacturer to ensure that DuraTech Chimney is an approved installation method. Applications5"-8" DuraTech is...