M&G DuraVent Chimney Systems

           DuraTech chimney pipe is designed for appliances that are tested and listed for use with a 2100° F HT chimney system. The DuraTech chimney System is designed to stay cool...

Used to add support to pipe lengths elbows and tees. This part is optional. Applications5"-8" DuraTech is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled...

Required when terminating a chimney above the roof. Spark arrestor screen available but not included. Applications5"-8" DuraTech is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or...

Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

  Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

  Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of...

 The DuraTech Storm Collar is an aluminum constructed chimney component that slips around the pipe just above the flashing used in through-the-roof installations. The inner edge of the Storm Collar is sealed to the chimney pipe with a non-hardening...

The Firestop Radiation Shield is installed where a chimney passes through a floor or ceiling without the use of a support box. It is used to center the pipe and assure the proper clearance required for the installation. The Firestop Radiation Shield...

An Attic Insulation Shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. The Attic Insulation Shield fits over the Firestop Radiation Shield or a support box and consists of...

The DuraTech Anchor Plate is used to attach DuraTech Chimney to zero-clearance or masonry fireplaces. Check with the zero-clearance fireplace manufacturer to ensure that DuraTech Chimney is an approved installation method. Applications5"-8" DuraTech is...

New integrated collar with adapter, fits into the female end of the chimney pipe to provide a decorative black finish. Use on chimney pipe that is suspended with the roof support system or on pipe that is passing through a wall thimble. Provides...

The Adjustable Tee Support Bracket is used as wall support for the tee and chimney. It features an adjustable base to provide 2" to 6" clearance to the wall and attaches to chimney pipe above or below the tee. The triangular bracket on the Tee Support...