M&G DuraVent Chimney Systems

DuraTech chimney pipe is designed for appliances that are tested and listed for use with a 2100° F HT chimney system. The DuraTech chimney System is designed to stay cool on the outside and provide a hot draft on the inside. A fire-safe design...

Low profile vertical cap  The DirectVent Pro Low Profile Termination Cap is designed for vertical installations only. Check the appliance manufacturer's instructions to determine which caps are approved for use with their appliance...

 Use for vertical terminations only. Provides improved performance in high wind conditions for vertical terminations only.   Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro features...

  The DirectVent Pro Storm Collar is used in conjunction with roof flashing to provide a weather proof penetration.      Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro...

The DirectVent Pro 5" x 8" Galvanized DSA Flashing for Roof Pitch of 0/12 - 6/12 is a component that is used in a typical venting installation. The DuraVent dead soft aluminum flashing can be used with metal or tile roofs with a pitch of 0/12 - 6/12. It...

  The DirectVent Pro Steep Roof Flashing is designed for those high-angled installations with roof pitches 7/12-12/12. Use to weather proof the penetration of vent pipe through the roof, Storm Collar required.     Stunning design...

  The DirectVent Pro Steep Roof Flashing is designed for those high-angled installations with roof pitches 7/12-12/12. Use to weather proof the penetration of vent pipe through the roof, Storm Collar required.   Stunning design and...

The wall strap is used to support vent pipe. Provides 1" clearance. Recommend installing Wall Straps at 4-foot intervals on vertical runs.   Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro...

The attic insulation shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the vent. Provides 1" clearance to combustibles.   Stunning design and Engineered Excellence®...

A ceiling fire stop is required for multi-story vertical installations at the second floor and any subsequent floors.   Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro features tight inner...

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (i.e.: ship lap siding, shake...

  The DirectVent Pro Wall Firestop is designed for horizontal (through-wall) installations. Refer to the appliance manufacturer's installation instructions for requirements.   Stunning design and Engineered Excellence® utilizing...