M&G DuraVent Chimney Systems

The DirectVent Pro 4" x 6-5/8" Galvanized Round Horizontal Termination Cap Square Base (Aluminum) is a component that is used in a typical venting installation. The round horizontal termination cap is used for through-the-wall terminations. Stunning...

Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro features tight inner connections for superb performance, with no gaskets or sealants required (unless specified by the appliance manufacturer). All...

Prevents water intrusion into stucco-sided homes. Allows the installer to apply siding material (ie: stucco, brick, etc) over the flanges up to the sides of the flashing for a water-tight seal. Kit includes 4-pieces; sized for Square Horizontal Cap only...

The DirectVent Pro 4" x 6-5/8" Galvanized DSA Flashing for Roof Pitch of 0/12 - 6/12 is a component that is used in a typical venting installation. The DuraVent dead soft aluminum flashing can be used with metal or tile roofs with a pitch of 0/12 - 6/12...

Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro features tight inner connections for superb performance, with no gaskets or sealants required (unless specified by the appliance manufacturer). All...

Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro features tight inner connections for superb performance, with no gaskets or sealants required (unless specified by the appliance manufacturer). All...

The wall strap is used to support vent pipe. Provides 1" clearance. Recommend installing Wall Straps at 4-foot intervals on vertical runs.   Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro...

The attic insulation shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the vent. Provides 1" clearance to combustibles.   Stunning design and Engineered Excellence®...

A ceiling fire stop is required for multi-story vertical installations at the second floor and any subsequent floors.   Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro features tight inner...

4" ID x 6-5/8" OD DuraVent DirectVent Pro Vinyl Siding Standoff Kit (Small), 12-7/8" x 12-7/8"   Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material...

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (i.e.: ship lap siding, shake...

The DirectVent Pro 4" x 6-5/8" Inner Diameter Galvanized Wall Thimble - Reduced is a component that is used in a typical venting installation. The DirectVent Pro small wall thimble provides a complete wall-pass-through and fire stop. Use with Round...