M&G DuraVent Chimney Systems

The DuraTech Wall Thimble adjusts from a minimum of 4" to a maximum of 10", and fits between standard wall studs. To accommodate thicker walls, the telescoping pieces can be separated, and a field-fabricated extension installed. The interior trim ring is...

The DuraTech Round Ceiling Support Box supports chimney pipe and provides a positive connection between the support box and the chimney pipe with a built-in twist lock feature. This ceiling support box will support up to 60' of DuraTech Chimney. Trim...

  The DuraTech Square Ceiling Support Box supports chimney pipe and provides a positive connection between the support box and the chimney pipe with a built-in twist lock feature. This ceiling support is suitable for both flat and cathedral ceiling...

  DuraTech chimney pipe is designed for appliances that are tested and listed for use with a 2100° F HT chimney system. The DuraTech chimney System is designed to stay cool on the outside and provide a hot draft on the inside. A fire-safe...

  DuraTech chimney pipe is designed for appliances that are tested and listed for use with a 2100° F HT chimney system. The DuraTech chimney System is designed to stay cool on the outside and provide a hot draft on the inside. A...

Low profile vertical cap  The DirectVent Pro Low Profile Termination Cap is designed for vertical installations only. Check the appliance manufacturer's instructions to determine which caps are approved for use with their appliance...

The DirectVent Pro 5" x 8" Galvanized Square Horizontal Termination Cap (Aluminum) is a component that is used in a typical venting installation. The DirectVent Pro square horizontal termination cap is used for standard and high wind through the wall...

The co-linear adapter is used for stoves with 4" x 6-5/8" co-axial outlets. Refer to appliance manufacturer's installation instructions for approval. The connector uses 3" aluminum flex for both intake and exhaust.   Stunning design and Engineered...

The co-linear adapter is used for stoves with 4" x 6-5/8" co-axial outlets. Refer to appliance manufacturer's installation instructions for approval. The connector uses 3" aluminum flex for both intake and exhaust.   Stunning design and Engineered...

The co-linear adapter is used for stoves with 4" x 6-5/8" co-axial outlets. Refer to appliance manufacturer's installation instructions for approval. The connector uses 3" aluminum flex for both intake and exhaust.   Stunning design and Engineered...

The DirectVent Pro 4" x 6-5/8" Galvanized Square Horizontal Termination Cap (Aluminum) is a component that is used in a typical venting installation. The DirectVent Pro square horizontal termination cap is used for standard and high wind through the wall...

Convert your factory-built chimney into a direct vent system easily and affordably with this conversion kit. This kit is compatible with a variety of manufacturers and inner diameters of chimney liners. The sturdy construction features a 0.20" aluminum...