M&G DuraVent Chimney Systems

Product Description 3PVP-T DuraVent Pellet Vent Pro Tee With Tee Clean Out Cap 3" Diameter All PelletVent Pro® components that come into contact with flue gases are built with an inner wall of corrosion resistant superferritic metal. PelletVent...

8" Dura-Vent Dura/plus Chimney Cap, Stainless. Required where chimney pipe terminates above the roofline. Removable screws allow for cleaning of the chimney and spark arrestor screen. Materials and Construction.016" 430 stainless steel outer wall...

Supports chimney when it extends more than 4' over the roof. Legs adjust from 64" to 115". Use when securing DuraPlus pipe to the roof when it extends more than 5' above the roof line.    Materials and Construction.016" 430 stainless steel...

8" Dura-Vent Dura/plus Flashing 0/12-6/12, Galvalume, Storm Collar Not Included. Roof flashings provide leak proof roof penetration. These flashings require a Storm Collar , sold separately.  Materials and Construction.016" 430 stainless steel...

For use in a ceiling or floor when a ceiling support is not used, allowing the passage of Class A chimney DuraPlus through floors and ceilings safely. 16" length, Galvanized, Storm collr included. Materials and Construction.016" 430 stainless...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.  The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2" clearance...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.   The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2"...

Use to adapt on a zero-clearance fireplace when using DuraPlus directly off the unit. Starter Section built in. Materials and Construction.016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate...

Use to support the Tee; suspended from a wall. Supports up to 35 ft. of DuraPlus Chimney. Starter Section built-in. Materials and Construction.016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate...

8" DuraPlus Galvanized Wall Thimble is used to pass through an outside wall. It must be installed with a length of chimney passing through it. This length connects to the tee on the outside of the building. Then one of three adaptors are used to connect...

8" DuraPlus Galvanized Wall Thimble is used to pass through an outside wall. It must be installed with a length of chimney passing through it. This length connects to the tee on the outside of the building. Then one of three adaptors are used to connect...

8DP-12 8" x 12" Dura-Vent DuraPlus Chimney Length, Inner Liner 430-alloy Stainless, Galvanized Outer Wall DuraPlus Chimney is a triple-wall, all-fuel chimney for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or...