M&G DuraVent Chimney Systems

This is a 3" Pellet Chimney Stainless Steel Clean-Out Tee Cap, this is from the PelletVent Pro Line. It has the duralock tightening system, to get a tight fit. Use this clean-out tee cap as a replacement with the Tee.

PelletVent Pro Collection 3 Inch Pellet Chimney Stainless Steel Appliance Adapter with Adjustable Clamp Warranty Notice: M&G DuraVent warranty applies to this professional grade product only when installed by a trained professional installer. This 3...

DuraVent DuraBlack 6" Snap Lock Adapter w/Trim 6DBK-ADSL 24 Gauge Spot-welded lock seams 18" clearance to combustibles Limited Lifetime Warranty    

Product Description 4PVP-T DuraVent Pellet Vent Pro Tee With Tee Clean Out Cap 4" Diameter All PelletVent Pro® components that come into contact with flue gases are built with an inner wall of corrosion resistant superferritic metal. PelletVent...

Product Description 3PVP-T DuraVent Pellet Vent Pro Tee With Tee Clean Out Cap 3" Diameter All PelletVent Pro® components that come into contact with flue gases are built with an inner wall of corrosion resistant superferritic metal. PelletVent...

8" Dura-Vent Dura/plus Chimney Cap, Stainless. Required where chimney pipe terminates above the roofline. Removable screws allow for cleaning of the chimney and spark arrestor screen. Materials and Construction.016" 430 stainless steel outer wall...

Supports chimney when it extends more than 4' over the roof. Legs adjust from 64" to 115". Use when securing DuraPlus pipe to the roof when it extends more than 5' above the roof line.    Materials and Construction.016" 430 stainless steel...

8" Dura-Vent Dura/plus Flashing 7/12-12/12, Galvalume, Storm Collar Not Included. Roof flashings provide leak proof roof penetration. These flashings require a Storm Collar , sold separately.      Materials and Construction.016" 430...

8" Dura-Vent Dura/plus Flashing 0/12-6/12, Galvalume, Storm Collar Not Included. Roof flashings provide leak proof roof penetration. These flashings require a Storm Collar , sold separately.  Materials and Construction.016" 430 stainless steel...

For use in a ceiling or floor when a ceiling support is not used, allowing the passage of Class A chimney DuraPlus through floors and ceilings safely. 16" length, Galvanized, Storm collr included. Materials and Construction.016" 430 stainless...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.  The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2" clearance...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.   The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2"...