M&G DuraVent Chimney Systems

8" Dura-Vent Dura/plus 30 Deg Stainless Steel Elbow Kit, Includes 2 Adj Elbows, 1 Elbow Strap Use for offsets around obstructions such as rafters, ridgepoles, or joists. May have a pair of elbows if needed. Offsets greater than...

Product...

DuraTech Class-A Chimney System 30° Elbow Kit - Use elbows to offset around obstructions such as rafters, ridgepoles or joists. Offsets greater than 30° are not allowed. Each elbow swivels a full 360°. The DuraTech Class-A Chimney System...

DuraTech Class-A Chimney System 30° Elbow Kit - Use elbows to offset around obstructions such as rafters, ridgepoles or joists. Offsets greater than 30° are not allowed. Each elbow swivels a full 360°. The DuraTech Class-A Chimney System...

  DuraTech Class-A Chimney System 15° Elbow Kit - Use elbows to offset around obstructions such as rafters, ridgepoles or joists. Offsets greater than 30° are not allowed. Each elbow swivels a full 360°. The DuraTech Class-A Chimney...

The DirectVent Pro 5" x 8" Galvanized Snorkel Termination Cap 14" is a component that is used in a typical venting installation. The snorkel termination cap is sued for horizontal through the wall terminations when a vertical rise is desired in the...

The DirectVent Pro 4" x 6-5/8" Galvanized Snorkel Termination Cap 36" is a component that is used in a typical venting installation. The snorkel termination cap is sued for horizontal through the wall terminations when a vertical rise is desired in the...

The DirectVent Pro 4" x 6-5/8" Galvanized Snorkel Termination Cap 14" is a component that is used in a typical venting installation. The snorkel termination cap is sued for horizontal through the wall terminations when a vertical rise is desired in the...

DuraTech Class-A Chimney System 30° Elbow Kit - Use elbows to offset around obstructions such as rafters, ridgepoles or joists. Offsets greater than 30° are not allowed. Each elbow swivels a full 360°. The DuraTech Class-A Chimney System...