Chimney Systems

Supports chimney when it extends more than 4' over the roof. Legs adjust from 64" to 115". ApplicationsDuraPlus Chimney is a triple-wall, all-fuel chimney for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other...

6" & 8" Dura-Vent DuraPlus Storm Collar, Galvalume.  Use this aluminum storm collar on any through-the-roof installations using a roof flashing. ApplicationsDuraPlus Chimney is a triple-wall, all-fuel chimney for use with wood stoves,...

6" DuraPlus Flashing, 0/12 - 6/12 pitch Dead Soft Aluminum, Storm collar not Included. Roof Flashing is used to weather proof the penetration of chimney pipe through the roof. A storm collar is required (not included). The DSA Flashing is designed...

6" Dura-Vent Dura/plus Flashing 7/12-12/12, Galvalume, Storm Collar Not Included.  Roof Flashing is used to weather proof the penetration of chimney pipe through the roof. A storm collar is required (not included).  ApplicationsDuraPlus...

6" Dura-Vent Dura/plus Flashing 0/12-6/12, Galvalume, Storm Collar Not Included.  Roof Flashing is used to weather proof the penetration of chimney pipe through the roof. A storm collar is required (not included).  ApplicationsDuraPlus...

Attic Insulation Shields comes with a collar and base. This universal Attic Insulation Shield must be used in all installations that pass through an attic to prevent insulation and debris from accumulating near the chimney, unless chimney is...

For use in a ceiling or floor when a ceiling support is not used, allowing the passage of Class A chimney DuraPlus through floors and ceilings safely. 16" length, Galvanized, Storm collar included.   ApplicationsDuraPlus Chimney is a...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.   The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2"...

Can be used interior and exterior. Must be used every 8'. Mantains the proper 2" required clearance.   The 6" DuraPlus Wall Strap is for use in interior or exterior installations to support and stabilize the chimney while assuring a 2"...

Can be used on Interior or exterior use. Adjust 2" to 6" from wall. Needed every 4'. assures the minimum 2" clearance to combustables. ApplicationsDuraPlus Chimney is a triple-wall, all-fuel chimney for use with wood stoves, fireplaces, furnaces,...

Use to adapt on a zero-clearance fireplace when using DuraPlus directly off the unit. Starter Section built in. ApplicationsDuraPlus Chimney is a triple-wall, all-fuel chimney for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges,...

Use to support the Tee; suspended from a wall. Supports up to 35 ft. of DuraPlus Chimney. Starter Section built-in. ApplicationsDuraPlus Chimney is a triple-wall, all-fuel chimney for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges,...