Chimney Systems

The DirectVent Pro 5" x 8" Galvanized Square Horizontal Termination Cap (Aluminum) is a component that is used in a typical venting installation. The DirectVent Pro square horizontal termination cap is used for standard and high wind through the wall...

  The DirectVent Pro Storm Collar is used in conjunction with roof flashing to provide a weather proof penetration.      Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro...

The DirectVent Pro 5" x 8" Galvanized DSA Flashing for Roof Pitch of 0/12 - 6/12 is a component that is used in a typical venting installation. The DuraVent dead soft aluminum flashing can be used with metal or tile roofs with a pitch of 0/12 - 6/12. It...

  The DirectVent Pro Steep Roof Flashing is designed for those high-angled installations with roof pitches 7/12-12/12. Use to weather proof the penetration of vent pipe through the roof, Storm Collar required.     Stunning design...

  The DirectVent Pro Steep Roof Flashing is designed for those high-angled installations with roof pitches 7/12-12/12. Use to weather proof the penetration of vent pipe through the roof, Storm Collar required.   Stunning design and...

The wall strap is used to support vent pipe. Provides 1" clearance. Recommend installing Wall Straps at 4-foot intervals on vertical runs.   Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro...

The attic insulation shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the vent. Provides 1" clearance to combustibles.   Stunning design and Engineered Excellence®...

A ceiling fire stop is required for multi-story vertical installations at the second floor and any subsequent floors.   Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro features tight inner...

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (i.e.: ship lap siding, shake...

  The DirectVent Pro Wall Firestop is designed for horizontal (through-wall) installations. Refer to the appliance manufacturer's installation instructions for requirements.   Stunning design and Engineered Excellence® utilizing...

  The DirectVent Pro Wall Thimble provides a complete wall-pass-through and firestop and is designed for Square Horizontal Caps only.    Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing...

When a direct vent pipe must pass through a ceiling, it requires a ceiling support box that serves as the bottom support for the entire installation. This support box has an adjustable feature that allows it to be used with either cathedral or flat...