Pellet Vent Pro 4"

Use to add length to PelletVent Pro pipe. 12” pipe adds 3”-10” of length, 18” pipe adds 3”-16” of length, when used with rigid sections of pipe. Galvalume or painted black outer finish. All PelletVent Pro®...

Use to attach to appliance outlet allowing for easy pipe connection. Allows connection of 4” vent to 3” appliance outlet. Seal adapter to appliance with high temperature sealant All PelletVent Pro® components that come into contact...

Use for a 90° offset. Attaches directly to appliance as an adapter. One piece unit incorporates removable twist-lock Clean-Out Tee Cap.  All PelletVent Pro® components that come into contact with flue gases are built with an inner wall of...

4PVP-TAD 4" Adapter Tee with Clean-Out Tee Cap Use for a 90° offset. Attaches directly to appliance as an adapter. Removable twist-lock Clean-Out Tee Cap. PelletVent Pro is a venting system designed for stoves and inserts that use wood pellets and...

4' Adapter Tee w/Tee Cap Attaches directly to appliance as an adapter. Removable twist-lock Clean-Out Tee Cap. Designed for stoves and inserts that use wood pellets, corn, oil fuel, and other biofuel products. Rated for continuous use flue...

4PVP-SC Storm Collar This 4 Inch Pellet Chimney Storm Collar from the PelletVent Pro series is a Type B gas component and consists of the duralock system for a tight seal. Use to maintain a weather tight resistant seal between the pipe and the flashing...

4PVP-RC Reduction Collar 4" PelletVent PRO, Reduction Collar. This is a 4" Reduction Collar from the PelletVent Pro Line. .This reduces the center hole diameter in the ceiling support/wall thimble Cover to fit 3" and 4" pellet pipe. This can be...

4PVP-HC Pelletvent Horizontal Cap 4" PelletVent PRO, Horizontal Cap. This is a 4" (inside diameter) Horizontal Cap, this is from the PelletVent Pro Line. It has the duralock tightening system, to get a tight fit. Use this for horizontal...

4PVP-FTC 4" PelletVent Flex Trim Collar PelletVent Pro Collection Flex Trim Collar - 4 Inch Inside Diameter 

4PVP-E90 PelletVent 90 Degree Elbow Diameter: 4. Construction Materials: Laser-welded, double-wall pipe with an inner wall of .012 stainless steel Clearances: 1 clearance to combustibles in the USA for appliances using wood pellets or oil. 1...

4PVP-E45 45 PelletVent 45 Degree Elbow    The DuraVent PelletVent Pro 45 Degree Elbow is for use to offset pipe diagonally or horizontally around obstructions. Elbow swivels a full 360 Degree at the base, angle is not adjustable ...

 4PVP-DBT- Double Tee with Cleanout Tee Cap Allows clean-out access for horizontal and vertical installations. Use for 90 offset. Branch swivels for proper alignment. Removeable twist-lock Clean-Out Tee Cap Manufacturer's Limited Lifetime...